🛢️ How to Do an Oil Change on a Can-Am Ryker

Brought to you by GLM Power Sports – Clinton Township, MI

At GLM Power Sports, we’re proud to help Ryker riders across Michigan and beyond keep their machines in peak condition. Whether you’re a seasoned DIYer or just getting started, this guide will walk you through how to perform an oil change on your Can-Am Ryker—right from your own garage.

🧰 Tools & Materials You'll Need

Make sure you’re stocked up before you begin. You’ll need:

Can-Am Oil Change Kit (includes oil, filter, O-rings, crush washer)
Socket wrench set (including Torx bits)
Oil catch pan
Funnel
Shop towels or paper rags
Torque wrench (for exact specifications)

🔧 You can order genuine Can-Am oil change kits directly from us at GLM Power Sports, or visit the official site here:
Can-Am Oil Change Kits

🔄 Step-by-Step Guide: Can-Am Ryker Oil Change

1. Warm the Engine

Start your Ryker and let it idle for 5–10 minutes. This warms the oil, making it drain more efficiently.

2. Secure the Vehicle

Park on a level surface and ensure the Ryker is stable. Use wheel chocks or a motorcycle lift if available.

3. Drain Old Oil

Remove the oil drain plug underneath the engine using your socket wrench.
Let all oil drain into your catch pan.
Unscrew and remove the oil filter (usually on the lower side of the engine).

4. Install New Filter & Seals

Replace the oil filter and install new O-rings and crush washer.
Lightly oil the new filter gasket before installing.
Reinstall the drain plug and tighten to the manufacturer’s torque spec.

5. Add New Oil

Using a funnel, pour in fresh 5W-40 synthetic oil. Most Ryker models take approximately 3.3–3.5 quarts.
Start the engine briefly and check for leaks.

6. Final Check

After the engine runs for 30 seconds, shut it off.
Wait a minute, then use the dipstick to check the oil level. Top off as needed.

📘 Resources & Support

For official guides, manuals, and torque specs:
📄 Can-Am Ryker Owner’s Manuals

Need help or want us to handle it for you? Stop by GLM Power Sports in Clinton Township, MI, or give us a call. Our service team is Can-Am certified and always happy to assist!

📍 GLM Power Sports
📫 Clinton Township, MI
🌐 www.glmpowersports.com
📞 586-834-8639

💡 GLM Pro Tip

Always dispose of old oil and filters at a certified recycling center. Want a hands-free option? We’ll take care of everything—just book a service appointment with GLM Power Sports.

🧭 Ride On, Worry-Free

With just a few tools and some time, you can confidently handle your own Can-Am Ryker oil change. Whether you ride for fun or for the thrill, routine maintenance ensures every mile is smooth and safe.

For parts, service kits, or professional assistance, GLM Power Sports has your back. Ride smart. Ride clean. Ride local.